2. Press the up and down‐navigation key to select one of the alarms and press
the left soft key to access the alarm setting.
3. Press the left and right‐navigation key in the alarm clock setting interface to
select alarm clock setting content. You may set the alarm clock using State
(On/Off), Time, Mode and Prompt.
4. The AM/PM is set by pressing the center of the navigation keys.
5. When you have selected and set each item, press the up and
down‐navigation key to select the next line; when you have selected time,
you can input the time directly.
Calculator
The Calculator can perform four standard operations (add, subtract, multiply, divide).
Use 0‐9 keys to input a value.
The layout of the calculator matches the keypad, so that multiplication is shown with the
"*" key, the enter key is the Left Soft Key sign, addition is with the "+" key and so on. You
can also press the navigation keys to select one of the four operations: add, subtract,
multiply and divide.
1. Press the number keys to enter a value
2. Select an operation
3. Press numeric keys to input the second operation value
4. Select the = key. The result will be displayed on the screen.
To perform multiple mathematical operations, you must press equal (=) after each
operation.
Stopwatch
This unit provides two stopwatch functions: common mode and loop mode.
The Common Mode is a simple stopwatch, on/off and reset.
1. Press "Select" to start timing.
2. Press Select or left soft key to stop.
3. Press again to continue timing. If there is a time noted, press the right soft
key to clear.
The Loop Mode is so that additional time segments can be added, started and stopped
to record various activities within the event. The "add" button adds another loop while
recording the previous loop's time.
19