Other Function Settings (P4 Oth) - Excell QWS User Manual

EXCELL PRECISION CO., LTD.

3-3 Other Function Settings (P4 oth)

Enter other funcfion settings"P4 oth" and press
Key to select ON or OFF in Animal mode and Auto. average unit weight. After seleting,
press key to save the setting or press
finished, press key to back to weighing mode.
Animal mode
Average unit
weight
Tare range
Continuous tare
Foot switch
(option)
Press key to save the setting or press
key to exit without saving and back to
last step.
 Animal mode: Use when weighing animals that are in motion. The weight value can be
held for maximum weight or when the weight is stable depending on the hold function
setting.
 Average unit weight: If the weight of the objects on platter > the previous sampling
number more than 5 pcs, and also < 200% the previous sampling number, the scale will
automatically adjust the unit weight.
 Continuous tare: If this function off, it only can be tare for once. It can not be tare until
tare cancel; If this function on, ii can be tare continuously except gross weight >
capacity.
 Default settings are marked by *
02027011
key to enter sub-menue setting. Press
key to exit without saving. After all settings
or
or
.
or
or
or
Zero
Tare
Print
21
Press key to select ON or OFF*.
Press key to save the setting.
If it sets ON, in weighing mode, press
+ key to call up Hold mode.
Press key to select ON or OFF*.
Press key to save the setting.
Tare range setting: Press
to adjust val ue. Press
kg
key to move cursor. Press
to save the setting
Press key to select ON* or OFF.
Press key to save the setting.
Press key to
save the setting.
ZSME300000342
key
or
key