Table of Contents
Advertisement
Note: The target device must also have Wi-Fi Direct service active and running before it can
be detected by your device.
Assign a Unique Name
1. Press
2. Tap
> Device name.
<icon>
3. Modify the current name and then tap OK.
VPN
If you want to send and receive email messages through an ISP (Internet Service Provider)
account (such as Outlook), or if you wish to use your device to access your corporate email
through a VPN (Virtual Private Network), you will first need to set up an IMAP or POP account.
Before you add a VPN you must determine which VPN protocol to use: PPTP, L2TP/IPSec
PSK, L2TP/IPSec RSA, IPSec Xauth PSK, IPSec Xauth RSA, or IPSec Hybrid RSA.
Note: You must configure a PIN or alphanumeric password before using credential storage
functions.
1. Press
2. Tap VPN > Add VPN network.
3. Enter a name for the VPN network in the Name field.
4. Select a VPN type from the Type drop-down menu. The options are:
PPTP (Point-to-Point Tunneling Protocol)
L2TP/IPSec PSK (Layer 2 Tunneling Protocol / Internet Protocol Security Pre-Shared
Key)
L2TP/IPSec RSA
IPSec Xauth PSK
IPSec Xauth RSA
IPSec Hybrid RSA
5. Enter the Server address and any other required fields that are dependent upon the
Type you entered previously.
6. Tap the Show advanced options check box to display additional VPN options.
Settings
FOR INTERNA L USE ONLY
and tap
> Settings > More settings > Wi-Fi Direct.
and tap
> Settings > More settings.
DRAFT
30
Advertisement
Table of Contents
