Sealing Your Camera To Prevent Water Damage - ION Camocam Wi-Fi Quick Start Manual

2. Go to the network setting of your mobile device and choose Wi-Fi settings. Search the
network, find and click "WIFIPODZ".
3. Enter password "123456789" to connect to your camera.
4. Open your Internet browser and input "192.168.1.2" or "wifi.podz". You can now view
the photos and videos stored in your camera.
8.2.4 Connecting the Camera to Your Smart Device (App)
1. Search "ioncamera" app in your devices app store.
2. Download and install the app to your smart device.
3. Turn on your Wi-Fi PODZ.
4. Go to the network settings of your device and choose Wi-Fi settings. Search the
network, find and click "WIFIPODZ".
5. Enter password "123456789" to connect to your camera.
6. Open your app.
7. Please refer to the app page for detailed operating instructions.

9. Sealing Your Camera to prevent water damage

The Waterproof Housing (standard PODZ on iON CAMOCAM camera and Wi-Fi PODZ in
CAMOCAM ) allows you to operate the camera up to 10 meters or 30 feet under water. You
must seal the camera with the PODZ in order to protect the camera when using it in wet or
moist conditions.
Notes:
1. The rubber seal on the PODZ forms the waterproof barrier to protect the camera in wet
and underwater conditions. You must keep this seal clean as a single strain of hair or
grain of sand can cause leakage into the product.
2. After every use in salt water, you will need to rinse the outside of the product and the
seal with non-salt water and dry. Not doing this can cause corrosion in the product or
failure in the seal, in turn, damaging the product.
Warning:
Please ensure you install and lock the PODZ correctly before using
the camera to avoid water damage. Failure to properly seal your
EN-11