Menu Operation - Seiki SC-40FK700N User Manual

Basic Operations

Menu Operation

1
Input Setup
Press INPUT key on the remote control to enter "INPUT SOURCE" menu. There are
these options for you to select: "TV", "AV", "Component", "HDMI1", "HDMI2", "USB".
Use /key to select a input source and press ENTER key to confirm.
2
Channels Selection
There are four ways to select channel:
1) Using number keys, and ENTER keys on the remote control
to select channel directly.
To select channel 90, press
When you use the number buttons, you can directly select channels that were either erased
or not memorized.
2) Using CH /
When you press the CH
the channels that the TV has memorized.
You will not see channels that were either erased or not memorized.
3) Press key to return to previous channel, press it again to return to
current channel.
To quickly switch between two channels that are far apart, tune to one channel, then use the
number keys to select the second channel. Then use the
between them.
is not activated if no channel has been changed after TV turning on.
4) Select channels from "Channels List" or "Favorite List".
Press LIST key to choose from "Channel List" menu.
3
olume Adjustment and Mute Setup
V
Volume adjustment
Press VOL / key on the remote control or the TV to display "Volume" menu,
adjust the volume of TV between 0 to 100 by using VOL / key:
-
12
En
Input Source
TV
9
0
key on the remote control or on your TV to select channel.
/
key, the TV changes channels in sequence. You will see all
AV Component HDMI 1
.
ENTER
Input Source
HDMI 2
button to quickly alternate
USB