Advertisement
E
D
Step 1：Match the two(2) holes of parts E and
D and insert with M6x35 twist by L . Do not
fully tighten all screws until assembly is
complete.
E1
E
E
D
Step 3：Match the four(4) holes of parts E1
and E .Insert with M6x15 and tighten all the
screws.Ensure the table is stable,then place
the glass on top.
match the two different
holes
Important:
ASSEMBLY STEPS
E
D
E
E
E1
D
Screws Assembly Steps
insert screws
Do not fully tighten all screws until assembly is complete.
- 6 -
E1
E
D
Step 2：Match the two(2) holes of parts E and
D and insert with M6x35 twist by L . Do not
fully tighten all screws until assembly is
complete.
tighten the screws by
included wrench
E1
E
D
Advertisement
