Advertisement
MAINTENANCE OF WICKER AND RATTAN FURNITURE
1. Keep your furniture out of direct sunlight to prevent fading or weakening.
2. Do not use or store near fire or heat sources to avoid deformation, bending, or cracking.
3. To clean first use a mild detergent and dry towel then wipe with a damp cloth, and lastly
wipe with a soft dry towel.
4. Each two (2) to five (3) years, wipe down the furniture using slightly saline (salty) water.
This will keep your furniture clean, durable, and help to prevent moth infestation.
5. Renovation: first clean the furniture, then polish it using a slightly abrasive paper to make
the surface smooth, and lastly brush on protective oil onto the surface.
1. Check you have all the components and tools
2. Keep children and animals away from the work area, small parts could choke if
swallowed.
3. Make sure you have enough space to layout the parts before starting.
4. Do not stand or put weight on the product during assembly, this could cause damage.
5. Assemble the item as close to its final position as possible.
6. Dispose of all packaging carefully and responsibly.
7. When tightening the screws, ensure that the holes are matched correctly and that parts
are kept perpendicular to each other.
Friendly Tips
•
Please read these instructions fully before starting assembly
•
Do not fully tighten all screws until assembly is complete.
•
Make sure the assemble will be easier with 2 people.
SAFETY AND CARE ADVICE
Advertisement
