Text Messaging - Chevrolet CORVETTE Manual

56 Phone
Using the Dial or Call
Command
To call a number:
g
1. Press . The system responds
Command Please, followed
by a tone.
2. Say Dial or Call followed by
the complete phone number.
Use the Voice Keypad command
for international numbers or special
numbers which include * or #.
Once connected, the person called
will be heard through the audio
speakers.
To call using a contact from your
phone book:
g
1. Press . The system responds
Command Please, followed
by a tone.
2. Say Dial or Call and then
say the contact name. For
example Call John at Work.
Once connected, the person called
will be heard through the audio
speakers.
Calling Local Emergency Numbers
g
1. Press . The system responds
Command Please, followed
by a tone.
2. Say Call <emergency
number>.
Once connected, the person called
will be heard through the audio
speakers.
Using the "Voice Keypad"
Command
g
1. Press . The system responds
Command Please, followed
by a tone.
2. After the tone, say Voice
Keypad. The system allows
entry of special numbers and
characters.
Using the Voice Mail Command
g
1. Press . The system responds
Command Please, followed
by a tone.
2. After the tone, say Voice mail .
The system dials the voice mail
number of the connected
phone.
Clearing the System
Unless information is deleted out of
the vehicle Bluetooth system, it will
be retained. This includes phone
pairing information. For directions
on how to delete this information,
see "Deleting a Paired Phone."

Text Messaging

If equipped, the infotainment system
may allow text messages to be
received and replied to. Received
messages can also be read aloud.
Before using the text messaging
feature, check to see if the phone is
compatible.
See your retailer for details.
Text Menu
INBOX : Touch to display incoming
messages. To view a message,
touch the name of the sender.
>
Touch
to listen to the text
0
message. Touch to go back to
the previous menu.
Settings : See "Text Settings" later
in this section.