Keypad Lock; Basic Operation; Menu - Zte C S265 User Manual

Cdma 1x digital mobile phone

Table of Contents

Notes:

Make sure that the adapter is inserted into the correct position. Do not force the connector into the port.

•

The battery will be fully charged for 3~4 hours.

•

Use the charger provided by the original provider. Using unapproved charger may cause danger and

•

violate the authorization and warranty rules of the phone.

If the phone is over-used in shortage of battery or not used for a long time, the screen may not display

•

the charge indicator until it is continues charged for 10 to 40 minutes.

For maximum battery performance, it is recommended that you completely charge the battery before

•

using the phone for the first time. A new battery's full performance is achieved only after three

complete charge and discharge cycles.

Once the charging is complete, remove the charger from both the power outlet and the phone.

•

To charge the battery, you can use the provided charger or the USB data cable.

•

Charging is only possible within a temperature range of -5℃ to +45℃.

•

Keypad lock

Use the keypad lock to prevent the keys from being accidentally pressed.

In standby mode, you can select Left Soft Key [Menu] > Settings > Phone Settings > Auto Keypad

Lock and set the keypad locking automatically. Or cancel the keypad locking automatically.

If you want to unlock the keypad, press Right Soft Key [Unlock] firstly and then press * Key to unlock.

Tips:

When the keypad is locked, Unlock is shown in the bottom right hand of the screen.

•

If the call is coming when the keypad is locked, you can press Call Key to answer. After ending or

•

rejecting the call, the keypad will be locked automatically.

When the keypad lock is on, calls may be possible to the official emergency number programmed into

•

your device.