Installing And Checking The Ink Cartridges - Epson ESC480 Setup Manual

5. Follow the on-screen instructions to plug the power cord into
a properly grounded electrical outlet. Before plugging in the
cord, check the label on the back of the printer to make sure
the voltage required by the printer matches that of the
electrical outlet you will plugging it into. Also, make sure that
you have the correct power cable for your power source.
c
Note:
If the power cord is not attached to the printer, connect it to the AC
inlet on the back of the printer.
6. After plugging in the power cord, the
Setup utility opens automatically. If a
message informs you to restart your
computer, follow the instructions.

Installing and Checking the Ink Cartridges

When your printer software installation is complete, the Setup
utility opens automatically. The Setup utility leads you through
the ink cartridge installation process and then prints nozzle and
print head alignment check patterns to ensure that your printer
is operating correctly. Follow the on-screen instructions. When an
on-screen message informs you that the ink cartridge installation
is complete, click OK and proceed to "Printing Your First Page"
section.
Caution:
It is not possible to change the printer's voltage. If the rated
voltage and your outlet voltage do not match, contact your
dealer for assistance. Do not plug in the power cord.
9