Letterhead/Preprinted paper
Single-sided
Standard tray/
Face up
Optional dual
cassette feeder
Multi-purpose tray
Face down
•
Preprinted paper must be printed with heat-resistant ink that will not
melt, vaporize, or release hazardous emissions when subjected to the
machine's fusing temperature about 170°C (338 °F) for 0.1 second.
•
Preprinted paper ink must be non-flammable and should not adversely
affect machine rollers.
•
Forms should be sealed in a moisture-proof wrapping to prevent
changes during storage.
•
Before you load preprinted paper, verify that the ink on the paper is dry.
During the fusing process, wet ink can come off preprinted paper,
reducing print quality.
Glossy
Load a piece paper into the multi-purpose tray at a time, glossy side
facing down.
•
Recommend media: Glossy paper (Letter) for this machine by HP
Brochure Paper (Product: Q6611A) only.
•
Recommend media: Glossy paper (A4) for this machine by HP Superior
Paper 160 glossy (Product: Q6616A) only.
Tray setting
After loading paper in the paper tray, set the paper size and type using the
display screen. For computer printing, select the paper size and type in the
application program you use on your computer (see "Opening printing
preferences" on page 145).
The settings made from the machine driver override the settings on
the display screen.
Setting the paper size
1. Press Machine Setup > Tray Settings > Settings > select the tray you
want from the display screen.
double-sided
Face down
Face up
Media and tray_ 54
2. Press Paper Size and select the paper size.
•
You can change the paper list on the display screen pressing inch
Size or mm Size. The paper lists are divided into the available A/B
type and letter type paper in this machine.
•
If there is no required size paper or you need to use custom sized
paper, press the cardinal point arrows to set the paper size. You can
also set and save the custom size using Custom Size. You can
select the custom size whenever you need it.
3. Press
to save the selection.
Setting the paper type
1. Press Machine Setup > Tray Settings > Settings > select the tray you
want from the display screen.
2. Press Paper Type and select the paper type.
3. Press
to save the selection.