Extech Instruments HT200 User Manual page 6

Data Hold
Press and hold the Unit/DH
HOLD display icon will appear the displayed reading will be frozen until the button is pressed and
held again.
Note: The HOLD function is unavailable when the SET function is enabled.
Manual Data Recording
Press the REC
will briefly appear on the LCD while the reading is stored.
Note: The Record Reading function is unavailable in the HOLD, SET, and VIEW DATA RECORDS
modes.
View Data Records
Press and hold the Backlight/Mem
mode. When the View Data Records mode is accessed, the record number is shown on the
bottom of the display, the associated reading is shown at the center or the LCD, and the 'M'
memory and 'REC' icons will be visible.
Use the arrow buttons to scroll through the stored readings.
Press the Mode/Set
currently selected record.
Press the Unit/DH
Press and hold the Backlight/Mem
Note: The View Data Records mode is unavailable when the HOLD or SET function is enabled.
Maximum‐Minimum (MAX‐MIN) Reading Recording
Press and hold the Max/Min
show the MAX icon along with the maximum temperature measurement.
Use the Max/Min
readings. Press and hold the Max/Min
maximum/minimum mode.
Note: The MAX‐MIN mode is unavailable when the HOLD, SET, or VIEW DATA RECORDS function
is enabled.
800.561.8187
button for 2 seconds to enable the Data Hold function. The
button to manually record (store) the current reading. The REC and R symbol
button to change the measurement type (i.e. WBGT, TA, %RH) for the
button to switch the temperature unit.
button to enter the MAX‐MIN recording mode. The LCD will
button to toggle between Maximum (MAX) and Minimum (MIN)
www.
button to turn access (or exit) the View Data Records
button to exit the viewing data records mode.
button for more than 2 seconds to exit the
6
.com
EXTECH INSTRUMENTS
HT200‐en‐GB_V1.4 11/16
information@itm.com