Volume - Kenwood Nexedge Instruction Manual

Turn the Power switch/ Volume control clockwise to switch the
transceiver ON.
Turn the Power switch/ Volume control counterclockwise fully
to switch the transceiver OFF.
If the transceiver is password protected, "PASSWORD" will
appear on the display when the power is turned ON. To
unlock the transceiver, enter the password:
1 Select a character using the DTMF keypad.
• Press
# to delete all characters.
2 Press
• If you enter an incorrect password, an error tone sounds
and the transceiver remains locked.
• The password can contain a maximum of 6 digits.
Rotate the Power switch/ Volume control to adjust the volume.
Clockwise increases the volume and counterclockwise
decreases it.
or # to delete a character. Press and hold
or
or
9