Larson Electronics EXP-MS-30W-N4X User Manual

1 DESCRIPTION
DESCRIPTION DESCRIPTION DESCRIPTION
3
2

SPECIFICATIONS

DESCRIPTION
Technology:
Transmitter frequency:
Transmitter radiated power:
Transmitter power density:
Mounting height:
Detection zone:
Minimum derection speed:
Supply voltage:
Mains frequency:
Power consumption:
Output:
- Max. contact voltage:
- Max. contact current:
- Max. switching power:
Temperature range:
Housing certification
Dimensions:
Materials:
Tilt adjustment angle:
Weight:
Cable length:
Cable diameter:
Eletrical access:
Norm conformity
Specifications are subject to changes without prior notice. * Measured in optimal conditions
EXP-MS-30W-N4X | Larson Electronics, LLC
SPECIFICATION
microwave doppler radar
24.150 GHz
< 20 dBm EIRP
< 5 mW/cm²
11.5 - 25 ft
13 x 16 ft @ 16ft
12V to 24V AC ±10%; 12V to 24V DC +30% / -10%
50 to 60 Hz
relay (free of potential change-over contact)
42V AC/DC
1A (resistive)
30W (DC) / 60VA (AC)
from -22 °F to + 140 °F
(Adalet / Scott Fetzer Co., UL Listing # E81696)
UL Class I, Group B,C,D; UL Class II, Group E,F, G; UL Class III
CENELEC: EExd IIC, IP66; NEMA 4x, 7BCD, 9EFG
9 in (D) x 7 ½ in (W) x 5 ½ in (H)
Copper-free aluminum (Housing); Aluminum (Bracket)
- 90° to + 30° in elevation
30 ft (10m)
1/4 in (6.5 mm) (maximum)
3/4'' NPT pipe thread
R&TTE 1999/5/EC; EMC 2004/108/EC
EXP-MS-30W-N4X
USER'S GUIDE
EXPLOSION-PROOF MOTION SENSOR:
for normal to high mounting (11.5 ft - 25 ft)
1
2
1. Explosion-proof housing
2. Microwave sensor
3. Adjustable bracket
2 in/s*
< 2 W
10 lbs
Page 1 of 4