Using Compression And Bass Emphasis; Using Its Playlists - Pioneer SUPER TUNER III D FH-P8000BT Operation Manual

Section
06 Available accessories
Function and operation
PLAY MODE, RANDOM MODE,
SCAN MODE, PAUSE and TITLE INPUT opera-
tions are basically the same as that of the
built-in CD player.
Function name
PLAY MODE
RANDOM MODE
SCAN MODE
PAUSE
TITLE INPUT
Notes
! You can also select the function by pressing
FUNCTION on the remote control.
! To return to the playback display, press BAND.
! If you select other discs during repeat play,
the repeat play range changes to
M-CD REPEAT.
! If you perform track search or fast forward/re-
verse during TRACK REPEAT, the repeat play
range changes to DISC REPEAT.
! After track or disc scanning is finished, nor-
mal playback of the tracks begins again.
Using compression and bass
emphasis
You can only use these functions with a multi-
CD player that supports them.
66
En
Operation
Refer to Selecting a repeat play
range on page 19.
However, the repeat play ranges
you can select are different from
that of the built-in CD player. The
repeat play ranges of the multi-
CD player are:
! M-CD REPEAT – Repeat all
discs in the multi-CD player
! TRACK REPEAT – Repeat just
the current track
! DISC REPEAT – Repeat the
current disc
Refer to Playing tracks in random
order on page 19.
Refer to Scanning folders and
tracks on page 19.
Refer to Pausing playback on
page 19.
Refer to Entering disc titles on
page 20.
COMP (compression) and DBE (dynamic bass
emphasis) functions lets you adjust the sound
playback quality of the multi-CD player.
1 Display the function menu.
Refer to Introduction to advanced operations
on the previous page.
2 Use MULTI-CONTROL to select
COMPRESSION in the function menu.
# If the multi-CD player does not support
COMP/DBE, NO COMP is displayed when you at-
tempt to select it.
3 Press MULTI-CONTROL to select your fa-
vorite setting.
COMP OFF—COMP 1—COMP 2—
COMP OFF—DBE 1—DBE 2

Using ITS playlists

ITS (instant track selection) lets you make a
playlist of favorite tracks from the multi-CD
player magazine. After you have added your fa-
vorite tracks to the playlist, you can turn on ITS
play and play just those selections.
You can use ITS to enter and play back up to
99 tracks per disc from up to 100 discs (with
the disc titles). (With multi-CD players sold be-
fore the CDX-P1250 and CDX-P650, up to 24
tracks can be stored in the playlist.)
Creating a playlist with ITS programming
1 Play a CD that you want to program.
Push MULTI-CONTROL up or down to select
the CD.
2 Display the function menu.
Refer to Introduction to advanced operations
on the previous page.
3 Use MULTI-CONTROL to select
ITS MEMO in the function menu.
4 Select the desired track by pushing
MULTI-CONTROL left or right.