Ignition Switch; Keyless Push Button Ignition - Dodge Challenger 2018 Owner's Manual

Hide thumbs Also See for Challenger 2018:

Table of Contents

24 GETTING TO KNOW YOUR VEHICLE

IGNITION SWITCH

This feature allows the driver to operate the ignition with

the push of a button as long as the key fob is in the

passenger compartment.

The Keyless Push Button Ignition has four operating

positions, three of which are labeled and will illuminate

when in position. The three positions are OFF, ACC, and

ON/RUN. The fourth position is START. During start,

ON/RUN will illuminate.

NOTE: If the ignition switch does not change with the

push of a button, the key fob may have a low or dead

battery. In this situation, a back up method can be used to

operate the ignition switch. Put the nose side (side opposite

of the emergency key) of the key fob against the ENGINE

START/STOP button and push to operate the ignition

START/STOP Ignition Button

The push button ignition can be placed in the following

• The engine is stopped.

• Some electrical devices (e.g. Central locking, alarm, etc.)

are still available.

Table of Contents