Introduction To Advanced; Operations - Pioneer Premier DEH-P700BT Operation Manual

Operating this unit
3 Press MULTI-CONTROL to select a preset
phone number that you want to delete.
4 Press and hold MULTI-CONTROL to dis-
play MEMORY.
Push MULTI-CONTROL up or down to switch
MEMORY (memory) and DELETE (delete).
# About assigning , Assigning preset numbers
on the previous page.
5 Select DELETE and then press
MULTI-CONTROL to delete the preset
phone number.
Calling a number in the preset list
After finding the number you want to call in
the preset list, you can select the entry and
make a call.
1 Press LIST to display DIAL PRESET (pre-
set number list).
Refer to Using the phone number list on page
33.
2 Turn MULTI-CONTROL to select the
phone number.
# Press and hold DISP to scroll the phone num-
ber.
# If the phone number is already in the phone
book, the corresponding name is displayed.
In this case, press and hold DISP to scroll the
name.
# You can also change the phone number by
pushing MULTI-CONTROL up or down.
3 Press MULTI-CONTROL to make a call.
4 To end the call, press
Assigning preset numbers by using
MULTI-CONTROL
1 Push MULTI-CONTROL up or down to
switch preset numbers.
Perform from step 4 to 10 of Assigning
2
preset numbers on the previous page.
Assigning preset numbers by using
remote control
1
RECENT CALLS (call history list).
2
phone number.
3
preset in memory.
Preset number 10 is assigned to 0.
Calling number in the preset list by
using MULTI-CONTROL
1
switch preset numbers.
2
3
Calling number in the preset list by
using remote control
1
preset phone number.
# Pressing a number from 0 to 9 also recalls the
preset phone number.
2
# Pressing OFF HOOK can also make a call.
3

Introduction to advanced

operations

.
1
main menu.
2
FUNCTION.
The function menu is displayed.
Turn to change the menu option. Press to se-
lect.
Press thumb pad to display
Push thumb pad up or down to select a
Press a number from 0 to 9 and hold to
Push MULTI-CONTROL up or down to
Press MULTI-CONTROL to make a call.
To end the call, press
Push thumb pad up or down to select a
Press thumb pad to make a call.
To end the call, press ON HOOK.
Press MULTI-CONTROL to display the
Use MULTI-CONTROL to select
Section
02
.
37
En