Basic Functions - LIKUID L3-ENTRY Manual

1. Dialer Interface
In the idle mode, click
2. Dial a Call
2.1. Calls Category
2.1.1. Emergency Call
You can directly dial an emergency service call without SIM card.
Different network uses different emergency numbers, please consult your network operations
company for more details.
2.1.2. Domestic Call
Enter a phone number, choose
long-distance call, please add the area code before the telephone number.
2.1.3. Extension Dial
After entering a telephone number, press [Menu] to perform the following operations:
 Add 2-Sec Pause: Enter the host number, click "Add 2-Sec Pause", then enter extension
number, choose
the extension number.
 Add Wait: Enter the host number, click "Add Wait", then enter extension number, choose
or SIM2 after dialing the host number, pause for the waiting time to dial the extension number.
2.1.4. International call
Enter country code & area code (usually area code without "0") & telephone number, choose
or SIM2 to make an international call by SIM1 or SIM2.
2.1.5. Dial Contacts Number
After entering Contacts list, choose a contact, choose
SIM2.
2.1.6. Dial Call-log Number
After entering Call Log, choose a call record, click
SIM1 or SIM2.
2.2. Answer a Call
When an incoming call arrives, the phone will give out the corresponding prompt (such as vibration,
ringtone, and etc.); if network support, the phone screen will show the name and telephone number
of the caller, slide
2.3. Refuse a Call
When a call is coming
Ⅴ. Basic Functions
to enter Dialer interface.
SIM1 or SIM2
SIM1 or SIM2, after dialing the host number, pause for two seconds to dial
rightward, answer this call.
in, slide leftward, refuse this call.
to make a call by SIM1 or SIM2. If you're making a
SIM1 or SIM2
, then choose SIM1
15
to make a call by SIM1 or
or SIM2 to make a call by
SIM1
SIM1