Supra SL Owner's Manual page 48

Table of Contents

Advertisement

©2017 Skier's Choice, Inc.
Blower Switch
The blower switch activates the blower motor. The primary function of the blower fan is
to remove any fumes from the bilge area. The blower also draws fresh air into the engine
compartment.
Never depend solely on the blower to eliminate dangerous fumes. Before starting the
engine, always open the motor box to check if fumes are present. Switch on the blower
fan a minimum of four minutes before starting the engine.
NOTICE: If the blower fails to operate, reset the circuit breaker. If the blower still does
not operate, notify your Supra dealer.
Failure to operate the blower in accordance with the Coast Guard Recommendation
could result in an explosion.
Tilt Steering
Tilt steering may be adjusted up or down in five different
locking positions. To adjust, depress the tilt lever located
beneath the bezel and move the steering wheel to the desired
position. Release the lever to lock the wheel into place.
47

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Se

Table of Contents