Fcc Compliance; Health And Safety Information - Zte -G S203 User Manual

in eZi ABC/eZi abc mode. In ABC/abc mode, constantly press the digit key until the number
appears.
5. You can also input Chinese in PinYin/Simplified Chinese stroke/eZi PinYin mode.
6. Input Symbol: Press the * key to open the symbol list. Press the Up/Down keys to select a
symbol and press the
key till the required symbol (common symbols) appears.
7. Input Space: Press the 0 key to input space. It does not work in Numeric mode.
8. Delete Character: Press the Red key to clear a character. Hold the Red key to delete all
characters and clear the display.
9. Move Cursor to left or right: Press the Up/Down keys to move the cursor to left or right.

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this
device does not cause harmful interference.
Caution: Changes or modifications not expressly approved by the manufacturer could void
the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/ TV technician for help.

Health and safety information

Radio Frequency (RF) Energy
This model phone meets the government's requirements for exposure to radio waves.
This phone is designed and manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of the U.S. Government:
The exposure standard for wireless mobile phones employs a unit of measurement known as
the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for
SAR are conducted using standard operating positions accepted by the FCC with the phone
transmitting at its highest certified power level in all tested frequency bands. Although the SAR
is determined at the highest certified power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the poser required to reach the network. In
Green key to confirm it. In ABC/abc mode, constantly press the 1