Adjusting Equalizer Curves; Fine-Adjusting Equalizer Curve; Adjusting Loudness - Pioneer Premier DEH-P610BT Operation Manual

Cd receiver
Hide thumbs Also See for Premier DEH-P610BT:
Table of Contents

Advertisement

Available languages

Available languages

Audio Adjustments
! CUSTOM is an adjusted equalizer curve
that you create.
! When FLAT is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT and a set equalizer curve.
1
Display the audio menu.
Refer to Introduction of audio adjustments on
the previous page.
2
Use MULTI-CONTROL to select P.EQ.
3
Turn MULTI-CONTROL to select the
equalizer.

Adjusting equalizer curves

The factory supplied equalizer curves can be
adjusted to a fine degree (nuance control).
1
Display the audio menu.
Refer to Introduction of audio adjustments on
the previous page.
2
Use MULTI-CONTROL to select EQ
(equalizer adjustment).
3
Push MULTI-CONTROL left or right to
select the equalizer band to adjust.
LOW (low)—MID (mid)—HIGH (high)
4
Push MULTI-CONTROL up or down to
adjust the level of the equalization band.
+6 to –6 is displayed as the level is increased
or decreased.
# You can then select another band and adjust
the level.

Fine-adjusting equalizer curve

You can adjust the center frequency and the Q
factor (curve characteristics) of each currently
selected curve band (LOW/MID/HI).
Level (dB)
Center frequency
1
Display the audio menu.
Refer to Introduction of audio adjustments on
the previous page.
2
Use MULTI-CONTROL to select EQ
(equalizer fine adjustment).
3
Push MULTI-CONTROL left or right to
select the frequency to adjust.
Low: 40HZ—80HZ—100HZ—160HZ
Mid: 200HZ—500HZ—1KHZ—2KHZ
High: 3KHZ—8KHZ—10KHZ—12KHZ
4
Push MULTI-CONTROL up or down to
adjust the Q factor.
2W—1W—1N—2N

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1
Display the audio menu.
Refer to Introduction of audio adjustments on
the previous page.
2
Use MULTI-CONTROL to select
LOUDNESS.
3
Press MULTI-CONTROL to turn loudness
on.
Loudness level (e.g., MID) appears in the dis-
play.
# To turn loudness off, press MULTI-CONTROL
again.
Section
Q=2W
Q=2N
Frequency (Hz)
39
En
09

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Deh-p6100btDeh-p6100bDeh-6100bt

Table of Contents