System Upgrade; Reboot - Nexcom IWF2220 User Manual

7.4.3 System Upgrade

The Access Point provides a web firmware upload / upgrade feature. The administrator can download the
latest firmware from the website and save it on the administrator's PC. To upgrade the system firmware,
click Browse to choose the new firmware file you downloaded onto your PC and then click Upload to
execute the process. There will be a prompt confirmation message to notify the administrator to restart the
system after a successful firmware upgrade. Please restart the system after upgrading the firmware.

It is recommended to check the firmware version number before proceeding further.
Please make sure you have the correct firmware file.


Note: Firmware upgrade may sometimes result in the loss of data. Please ensure that all
necessary settings are written down before upgrading the firmware.

During firmware upgrade, please do not turn off the power. This may permanently
damage the system.

7.4.4 Reboot

This function allows the administrator to restart the AP safely. The process takes approximately three
minutes. Click Reboot to restart the system. Please wait for the blinking timer to complete its countdown
before accessing the system's Web Management Interface again. The System Overview page will appear
after a successful reboot.
Occasionally, it is necessary to reboot the AP to ensure that parameter changes are submitted.
System Upgrade Page
74
User's Manual
Light Industrial AP ENGLISH
Copyright © NEXCOM, INC.