Switching The Telephone Muting/Attenuation - Pioneer Premier DEH-P740MP Operation Manual

Initial Settings
Notes
• Even if you change this setting, there is no
output unless you switch the non fading out-
put (refer to page 35) or subwoofer output
(refer to page 34) in the audio menu on.
• If you change the subwoofer controller, sub-
woofer output and non fading output in the
audio menu return to the factory settings.
• Both rear speaker leads output and RCA rear
output are switched simultaneously in this
setting mode.
1 Press to select
FUNCTION
Press repeatedly until
FUNCTION
appears in the display.
2 Change the rear output setting with 5/∞.
Pressing 5/∞ will switch between
(full-range speaker) and
:FULL
(subwoofer) and that status will be displayed.
Notes
• When no subwoofer is connected to the rear
output, select
Rear SP:FULL
• When a subwoofer is connected to the rear
output, set for subwoofer
• When the rear output setting is
you cannot change the subwoofer controller.
3 Change the subwoofer controller with
2/3.
Pressing 2/3 will switch between
and
:INT S.W Control :EXT
be displayed.
.
SW
Rear SP
Rear SP
Rear SP :S.W
.
.
Rear SP:S.W
,
Rear SP:S.W
S.W Control
and that status will
Switching the Telephone
Muting/Attenuation
Sound from this system is muted or attenuated
automatically when a call is made or received
using a cellular telephone connected to this
product.
1 Press to select
FUNCTION
Press repeatedly until
FUNCTION
appears in the display.
2 Switch the telephone muting/attenuation
with 2/3.
Pressing 2/3 will switch between
(attenuation) and
:ATT
ing) and that status will be displayed.
.
TEL
Telephone
Telephone
(mut-
Telephone :MUTE
En
Section
08
39