Installing Your Sla5520 - Philips SLA5520 User Manual

EN
18

Installing your SLA5520

Before You Start
• Make sure that your wireless network is active.
• Make sure that Internet access is available.
• If your base station has Media Access Control (MAC) filtering enabled, make sure
that the SLA5520's MAC address is added to the Access Control List of your
base station. For details see 'MAC Address Control on the Wireless Network'.
If you are using a firewall, make sure that your firewall is correctly configured to
•
allow wireless access to shared media files. See 'Extra information' for more
details.
Connecting the SLA5520
1 Insert batteries and make sure it is correctly positioned as indicated by the
engraved symbols.
2 Connect the 1.8" plug of the cable to the audio socket on the SLA5520.
Connect the other end to the AUX input of your audio system amplifier
(2x RCA).
3 Connect the power cable to the power socket on the
and connect it to the power supply.
> The Wireless Music Adapter
(if it does not, press the y button on the remote control).
4 Select your display menu
Nederlands.
3 and 4 to select. Confirm with OK or 2 .
Use
> The Wireless Music Adapter
network and start the Configuration Wizard on the device.
should power on automatically after a few seconds
language: English, Français, Italiano, Deutsch, Español, or
will automatically search for a currently available wireless
Wireless Music Adapter