DISASSEMBLY & REASSEMBLY
3-2) Home Bar
PART NAME
DESCRIPTION
FIGURE
Disassemble the Cap Damper by
inserting a flat-blade screwdriver into the
slot and lifting it up.
Home bar
Door
Remove the Home-bar by pulling it out
while inserting a flat-blade screwdriver
into the hole and pulling out the shaft
as shown.
Remove a screw and a washer.
Oil Damper
① Remove the shaft.
② Disassemble the Oil-Damper by lifting
it up.
Disassemble the Cover-Latch by
Latch
inserting a flat-blade screwdriver into the
slot and pulling it gently.
19