Advertisement
1. Introduction
USBCommunicator allows easier and faster setting of SCMI-01 and is available on mini CD or on our
website
www.sinclair-solutions.com
. USBC software can also display current setting of SCMI-01
module.
2. Preparation
Mini USB cable is needed for communication between computer and SCMI-01 module. This cable is
not included in standard package.
Fig 1: Mini USB cable
Fig 2: Front panel of module
Connect the SCMI-01 module with computer using mini USB cable (Fig 1). Display of module will turn
on after successful connection.
3. SCMI-01 setting via USBCommunicator
Application bookmark
Here you can find the information about this software ("About"), select the language ("Language")
and you can also close whole application ("Close").
Fig 3: „Application" bookmark
Advertisement
