Eco Settings; General Settings - Philips 6402 series User Manual

bulbs off.
To switch the hue bulbs off...
1 - Press  , select All Settings and press OK.
2 - Select Ambilight and press  (right) to enter
the menu.
3 - Select Ambilight+hue > Lounge Light+hue.
4 - Select Off.
5 - Press  (left) repeatedly if necessary, to close
the menu.
View Configuration
With View Configuration, you can view current setup
of the Ambilight+hue, network, the Bridge and bulbs.
To view Ambilight+hue configuration...
1 - Press  , select All Settings and press OK.
2 - Select Ambilight and press  (right) to enter
the menu.
3 - Select Ambilight+hue > View Configuration.
4 - Press  (left) repeatedly if necessary, to close
the menu.
Reset Configuration
To reset Ambilight+hue...
1 - Press  , select All Settings and press OK.
2 - Select Ambilight and press  (right) to enter
the menu.
3 - Select Ambilight+hue > Reset Configuration.
The configuration is reset.
4 - Press  (left) repeatedly if necessary, to close
the menu
12.5

Eco Settings

Energy Saving

Eco settings bundles the settings that help the
environment.
Energy Saving
If you select Energy Saving, the TV switches to Picture
Style - Standard automatically, the most ideal energy
conscious setting for the picture.
To set the TV in Energy Saving...
1 - Press  , select All Settings and press OK.
2 - Select Eco Settings and press  (right) to
enter the menu.
3 - Select Energy Saving, the Picture Style is set to
Standard automatically.
4 - Press  (left) repeatedly if necessary, to close
the menu.
Screen Off
If you only listen to music, you can switch off the TV
screen to save energy.
To only switch off the TV screen...
1 - Press  , select All Settings and press OK.
2 - Select Eco Settings and press  (right) to
enter the menu.
3 - Select Screen Off. The screen will switch off.
4 - Press  (left) repeatedly if necessary, to close
the menu.
To switch the screen back on, press any key on the
remote control.
Switch Off Timer
If the TV receives a TV signal but you don't press a
key on the remote control during a 4 hour period, the
TV switches off automatically to save energy. Also, if
the TV does not receive a TV signal nor a remote
control command for 10 minutes, the TV switches off
automatically.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not
use the remote control of the TV, you should
deactivate this automatic switch off.
To deactivate the Switch Off Timer ...
1 - Press  , select All Settings and press OK.
2 - Select Eco Settings and press  (right) to enter
the menu.
3 - Select Switch Off Timer.
4 - Press the arrows  (up) or  (down) to adjust
the value. The value 0 deactivates the automatic
switch off.
5 - Press  (left) repeatedly if necessary, to close
the menu.
12.6

General Settings

USB Hard Drive
To set up and format a USB Hard Drive...
1 - Press  , select All Settings and press OK.
2 - Select General Settings and press  (right) to
enter the menu.
3 - Select USB Hard Drive.
4 - Select Start, then follow the instructions on
screen.
5 - Press  (left) repeatedly if necessary, to close
the menu.
For more information on how to install a USB Hard
54