Remote/Front Test; D Ownload Pgm - VESTEL SAT 3600 Service Manual

Satellite
Table of Contents

Advertisement

SERVICE MANUAL
13. Wait for the transfer to be completed. Then, disconnect and exit from Hyper Terminal
window.
Download PGM :
The object of this manual is to give necessary information and details to the user to
upgrade the program table of the receiver through RS232.
The list of the necessary equipment is as follows:
• Receiver and TV
• PC with "Hyper Terminal" function,
• RS232 serial communication cable (male to female modem cable).
Steps to be followed by the user are given below:
1.
Connect the serial communication cable between the RS232 outport of the receiver and the
serial communication port (COM1 or COM2) of the PC.
2.
Make sure that the PC is on and the receiver is in Power on mode.
3.
Go to " Clear Database " line and press "OK" key and then wait for twenty seconds (old
program table is deleted).
4.
Run "Hyper Terminal" program of the PC from Start / Programs / Accessories /
Communications / Hyper Terminal menu.
5.
For a new connection, run Hypertrm.exe file.
6.
Give a name and choose an icon for the connection. (You do not need to make a new
connection every time. You can use this name for the future connections.)
7.
Choose communication port in the new coming window (COM1 or COM2) whichever you
have used in Step 1.
8.
Port settings should be as follows:
Bits per second
Data Bits
Parity
Stop bits
Flow control
9.
Now Hyper Terminal connection is established. From "Transfer" menu, choose "Send File".
10. Enter file name to be sent (program table).
11. Choose 1K Xmodem as protocol type.
12. Press Send button of Hyper Terminal window and then Go to "Download PGM" line on the
service menu and press "OK" key of remote control. You will see the progress on the PC
screen. Besides, on TV screen the receiver will count the downloaded packets.
13. Wait for the transfer to be completed. Then, disconnect and exit from Hyper Terminal
window.
Reset receiver by replugging in the mains cord of the set to the mains supply. Receiver will tune
to new program table.

Remote/Front Test :

:
38400
:
8
:
None
:
1
:
None
Rev 1.0 21.10.02 16:23
Page 42

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents