Table of Contents
Advertisement
Available languages
Available languages
b) Press
or
to select INTERVAL.
c) Press
to decrease or increase to 5 MINUTE.
d) Press OK to save the current setting.
e) Press MENU to cancel setting and return to info
display.
4.1.10.Set.PIR.sensitivity
Note: It is recommended to use NORMAL mode.
The following shows how to set PIR sensitivity as Low
provided that the previous option is NORMAL.
a) Press MENU to display the setting menu.
b) Press
or
to select SENSE LEVEL.
c) Press
to select LOW.
d) Press OK to save the current setting.
e) Press MENU to cancel setting and return to info
display.
4.1.11.Set.date.and.time.stamp
The following shows how to set time stamp as OFF
provided that the previous option is ON.
a) Press MENU to display the setting menu.
b) Press
or
to select TIME STAMP.
c) Press
to select OFF.
d) Press OK to save the current setting.
e) Press MENU to cancel setting and return to info display.
32
4.1.12.Reset.to.default.settings
To reset the setting to the default values, the steps are
as follows:
a) Press MENU to display the settings menu.
b) Press
or
to select RESET.
c) Press OK to reset to default settings and return to info
display.
d) Press MENU to cancel setting and return to info display.
4.1.13.View.image.or.video
a) Switch to TEST mode and enter into info display.
b) Press OK to view the latest picture (or video) in LCD
screen on camera, TV monitor or image viewer with
TV-in connector.
c) Press
to start playing the video clip in TV monitor.
NOTE: Video clips cannot be played on the LCD screen
of the control.
d) Press
to stop playing and return to playback mode.
e) Press
to view the next picture (or video) and
the previous.
f) Press OK to return to info display.
When viewing images, the total number of all images in
the SD-card and the index number of the displayed image
will be shown respectively.
for
Advertisement
Table of Contents
