LG LGL24 Basic Manual page 35

Isai xx
Table of Contents

Advertisement

• Rubber seals
Rubber seal in au Nano IC Card (LTE) tray and microSD
memory card slot cover plays an important part in waterproof
function.
Do not damage or remove the rubber seals. Do not bite it
when closing au Nano IC Card (LTE) tray and microSD memory
card slot cover. Forcibly closing the cover with the rubber
seals caught may damage them resulting in loss of waterproof
property. Just a small particle (a hair, etc.) on the seals can
cause water leak. If any liquid other than plain water (e.g.
alcohol) gets on the rubber seals, it may cause deterioration
in durability.
Do not insert the sharp pointed object in au Nano IC Card
(LTE) tray or microSD memory card slot cover. Doing so might
damage or deform the product or damage the rubber seals,
causing water leak.
When attaching back cover, confi rm if au Nano IC Card (LTE)
tray and microSD memory card slot cover are attached fi rmly.
It is recommended to replace the parts for maintaining
waterproof property once every two years regardless of
whether any abnormality is present. For information on part
replacement, contact an au shop nearby.
• Charging
Never charge the battery if the main unit is wet.
The supplied and optional accessories are not waterproof.
• Waterproof property
Do not use the product in places where it may be sprayed
with high-pressure water (e.g. near a faucet or showerhead)
or submerge it in water for extended periods of time, as the
product is not designed to withstand high water pressure.
Also, do not expose the product to a water fl ow stronger than
the specifi ed fl ow rate (i.e. 6 liters per minute from a faucet
or showerhead, at which you might even feel pain in the skin).
Doing so might cause a fault, even though the product has
a waterproof property equivalent to IPX5. Do not wash the
product in a washing machine or ultrasound bath.
This product does not fl oat on water.
• Heat resistance
Do not use the product in places where boiling water may
splash on it, in saunas or near hot air (e.g. hairdryer). The
product is not resistant to high temperatures.
• Shock
This product is not resistant to shock. Do not drop the
product or subject it to shock. Also, do not jab the earpiece,
microphone or speaker with a cotton swab or any sharp object.
Doing so might damage or deform the main unit causing water
leak.
33

Advertisement

Table of Contents
loading

Table of Contents