Pico Macom SIRD-FTA Installation And Operation Manual page 45

PROBLEM
No picture appears
on the TV screen.
There is interfer-
ence on your digital
satellite channels.
The remote control
is not working.
TROUBLESHOOTING
POSSIBLE CAUSE
The system is con-
nected using RF
leads.
The system is con-
nected using RF
leads and the output
channel of the
Receiver interferes
with an existing ter-
restrial channel or
video signal.
Batteries exhausted.
Remote control is
incorrectly aimed.
WHAT TO DO
Check the UHF chan-
nel in your system and
tune the UHF channel
properly.
Change the
Receiver output
channel to a more
suitable channel, or
connect the system
using SCART leads.
Change the batteries.
Aim the remote control
at the Receiver or
check that nothing
blocks the front panel.
Troubleshooting
45