Pico Macom SIRD-FTA Installation And Operation Manual page 32

MAIN MENU
Transponder Setting
Select <Transponder Setting> by using CH+/–. Press OK to view the sub-
menu as shown in the following figure.
A. Select satellite
a. Select "Select satellite" icon by using VOL+/–.
b. Select a satellite you want by using CH+/– or PGUP/PGDW.
c. Press EXIT to return to the previous menu.
B. Add Transponder
This command allows you to add one or more transponders for the selected satellite.
a. Select a satellite for which you want to add a transponder by using CH+/–
or PGUP/PGDW.
b. Select "Add Transponder" icon by using VOL+/–.
c. Press OK to view the sub-menu as shown in the following figure.
32
4.3 Installation Settings