Totally Enclosed, Non-Vent Motor / Idler Assemblies - ADC AD-330 Installation Manual

Totally Enclosed, Non-Vent Motor / Idler Assemblies

Illus. No. Part No.
1 882910
801019
2 121350
3 154266
4 100250
5 150600
6 157010
7 154276
8 154275
9 152005
10 153005
11 850135
12 153001
13 153002
14 150501
15 153001
16 153002
17 150501
18 100064
100049
19 101097
101099
20 154327
24
Qty. Description
1 Idler Arm ONLY
1 Idler Arm Assembly with Hardware
(includes illus. nos. 1 through 10)
1 13/32" x 3/8" I.D. Bronze
1 3/8" x 3/8" Shoulder Screw
1 Back Side Idler Assembly
1 3/8-16 x 1-1/2" Hex Head Machine Bolt
1 1-7/8" Extension Spring
1 1/4-20 x 5/8" Shoulder Bolt
1 3/8-16 x 3-3/8" Spade Bolt
2 3/8-16 Hex Nut
1 3/8" Lock Washer
1 Idler Angle
2 5/16" Flat Washer
2 5/16" Lock Washer
2 5/16-18 x 3/4" Hex Head Machine Bolt
2 5/16" Flat Washer
2 5/16" Lock Washer
2 5/16-18 x 3/4" Hex Head Machine Bolt
1 1/3 hp 120/230v 1ø 60 Hz Totally Enclosed, Non-Vent Motor with Plug
1 1/3 hp 100-230v 1ø 50 Hz Totally Enclosed, Non-Vent Motor with Plug
1 Rear Motor Shaft Bushing (for 60 Hz models)
1 Rear Motor Shaft Bushing (for 50 Hz models)
1 1/4-20 x 3/8" Socket Setscrew
American Dryer Corporation 450239 - 4