FX1-1072 Installing parallel guide (Fig. 4) You can use the parallel guide as a guide for planer. Draw a cutting line on the work piece. Fit the parallel guide and align the blade edge with the cutting line .Adjust the Knob of parallel guide (1) until it comes in contact with the side of the work piece then secure it by tightening it.
We also disclaim all liability for any bodily injury resulting from inappropriate use of the tool. Repairs may only be carried out by an authorised customer service centre for FORD tools. You can always obtain more information at the number Customer phone number +88019555791 50 Any transportation costs shall always be borne by the customer, unless agreed otherwise in writing.