Table of Contents
Advertisement
11
CLEANING AND MAINTENANCE
Before carrying out any maintenance to your machine, always
remove the plug.
11.1 After wet use.
Empty water and sludge from the barrel or empty and wash the dust bag.
The fabric dust bag can be washed in soapy water.
Replace the fabric dust bag every 2 years at least.
11.2 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the
engine.
Regularly clean the machine housing with a soft cloth, preferably after each
use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
12
WARRANTY
This product is warranted as provided by law for a 12 -month period effective
from the date of purchase by the first user.
This warranty covers all material or production flaws excluding: batteries,
chargers, defective parts subject to normal wear & tear such as bearings,
brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades,
etc. ; damage or defects resulting from maltreatment, accidents or alterations;
nor the cost of transportation.
Damage and/or defects resulting from inappropriate use also do not fall under
the warranty provisions.
We also disclaim all liability for any bodily injury resulting from inappropriate
use of the tool.
Repairs may only be carried out by an authorized customer service centre for
FORD tools.
You can always obtain more information at the number Customer phone
number +351 234 604 097
Any transportation costs shall always be borne by the customer, unless agreed
otherwise in writing.
At the same time, no claim can be made on the warranty if the damage of the
device is the result of negligent maintenance or overload.
Definitely excluded from the warranty is damage resulting from fluid
permeation, excessive dust penetration, intentional damage (on purpose or by
gross carelessness), inappropriate usage (use for purposes for which the
device is not suitable), incompetent usage (e.g. not following the instructions
given in the manual), inexpert assembly, lightning strike, erroneous net
voltage. This list is not exhaustive.
Acceptance of claims under warranty can never lead to the prolongation of the
warranty period nor commencement of a new warranty period in case of a
device replacement.
Copyright © 2015
FCA-K402
P a g e
| 8
EN
www.Ford-tools.com
Advertisement
Table of Contents
