Table of Contents
Advertisement
C
D
"SYS-TEMP" is
indicated on the LCD.
"CHK MODE" is
indicated on the LCD.
"RUNNING" is
indicated on the LCD.
"MEMCHECK" is
indicated on the LCD.
"INIT" is
indicated on the LCD.
Thermistor's temperature data readout
Press the [SEL] key
: Data in the temperature sensor in the system control
is read every 5 seconds and displayed in hex numbers.
DVD unit check mode
Press the [SEL] key
(See section "5.1.4 DVD unit check mode" for details.)
Running mode: For use in running tests.
Press the [SEL] key
Memory check
Press the [SEL] key
: The remaining data capacity of the disc is displayed on the LCD.
Initialize user set data
Press the [SEL] key
: The system control EEPROM is initialized except for the
loading/ejection error history.
(No.MA154)1-27
Advertisement
Table of Contents
