Advertisement
Quick Links
Advertisement
Related Manuals for ZMODO ZM-KW1001-1TB
Summary of Contents for ZMODO ZM-KW1001-1TB
- Page 1 HD WiFi Camera NVR Kit Quick Start Guide...
-
Page 2: Hdd Installation
HDD Installation If your system does not include a pre-installed HDD, you can purchase your own and follow the steps below for installation. Make sure you purchase a 2.5” HDD optimized for always-on read/write surveillance, e.g. low-power WD AV-25 hard drives. Make sure that your NVR is powered off and unplugged from the power source. -
Page 3: Connecting Your System
Display Power Supply Camera Wireless Router Note: Image may vary for your specific NVR model. Connecting your system This quick start guide will help you configure your NVR kit for initial use. Follow the steps below to connect your NVR system. Connect the NVR to the included power adapter and plug it into a nearby power outlet. -
Page 4: Safety Requirements
The NVR is reading the hard drive. Solid red The hard drive is not working properly or no hard drive was detected. Blinking red Your NVR may have encountered an error. Try restarting the NVR. If the problem still persists, please contact Zmodo Support. -
Page 5: Mobile Setup
Download and install the “Zmodo” app from Google Play or the App Store (compatibility: iOS 7.0+ or Android 4.0+). Launch the app and sign up for a free Zmodo account. All of your devices will be bound to this account. - Page 6 This device can be set up with a Zmodo Beam. If you own a Connectwith Beam, please follow the instructions in your Beam quick guide Beam to connect your device instead. Log in and press in the upper right corner. Select "Add Device".
- Page 7 √ to proceed (Since you are configuring a NVR kit,the number of devices shall be the number of your cameras "N"+1, the"1" means the NVR. For example, if you are configuring a NVR kit with 4 cameras, the number of devices is 5.
- Page 8 Return to the Zmodo app page and select or enter the SSID and password of the WiFi network that you want your cameras to connect to. Note: The WiFi name and password are case- sensitive. √ to proceed. If you see this screen, the app will connect your WiFi NVR Kit to your WiFi network.
- Page 9 Tap to proceed. Note: The password provides an additional layer of security for your devices. You will not need to use this password when accessing your devices from the Zmodo app. It is not required, but it is highly recommended.
- Page 10 720P device)/2Mbps (for 1080P device )upload speed and 2Mbps(for 720P device)/4Mbps (for 1080P device ) upload speed when using the Zmodo Cloud Service. Before installing the cameras, carefully plan where and how they will be positioned, and how you will route the wiring that connects your cameras to the power adapters.
- Page 11 In order to increase the range, you may purchase a WiFi range extender to place near the cameras. Please visit www.zmodo.com/support for other tips on improving your WiFi signal range. Unplug and power off the cameras that have been configured in Section 3.
- Page 12 Fasten the bracket to the camera. You will be able to adjust the camera position using the adjustable camera bracket. Position the camera for an optimal viewing angle, and tighten the bracket. (image may vary for your specific camera model) Connect the supplied power adapter to the power port on the camera, and plug the adapter into a nearby power outlet.
- Page 13 Enjoy more smart features in the future! Viewing Options All of your Zmodo devices will be bound to your Zmodo user account. You can access your camera and other devices by using the Zmodo app with any Android or ®...
- Page 14 Make sure that you are connecting to a 2.4GHz WPA/WPA2 WiFi network, and your network is not hidden. Please make sure that you entered the network name and password correctly. Note: Both are case-sensitive. You may need to improve your WiFi strength. Visit www.zmodo.com/support for suggestions.
- Page 15 Support Having difficulty? You can use the Live Chat function in Zmodo app if you have any technical problems. Please follow the steps below: Go to "Me" in the bottom right corner in Zmodo app and select "Zmodo Support". For more instructions, troubleshooting, support, and other resources, please visit: www.zmodo.com/support...
Need help?
Do you have a question about the ZM-KW1001-1TB and is the answer not in the manual?
Questions and answers