Contents Guide to the Appliance Caring for the Environment Safety Information and Warnings Items in the Box Assembly and Operation Operation of Your Pedestal Fan Technical Specifications Care and Cleaning...
Guide to the Appliance 1. Blade Assembly (inside) 2. Safety Grille 3. 3-Speed Push Button Control 4. Height Adjustable Ring 5. Topple Resistant / Non-Scratch Base Caring for the Environment Responsible disposal of the packaging The packaging of your appliance has been selected from environmentally friendly materials and can usually be recycled.
Safety Warnings Read this Instruction Manual carefully before assembling or operating the appliance and keep it for future reference. If you pass the product on to a third party, include these instructions. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1.
Page 5
17. Do not leave the appliance running or operable in a place where young children or animals could have access to it without supervision. 18. Turn the fan OFF and unplug it from the outlet when it is not in use, when moving fan from one location to another and before cleaning.
Items in the Box Contents included in the box Instruction Manual Main Unit Assembly and Operation Your Pedestal Fan has been boxed unassembled to minimise packaging waste. Each part is designed to fit together and be disassembled easily for cleaning or storage. Assemble the base to the support pole using the fasteners provided.
Page 7
Place the back safety grille into position. Ensure the safety grille fits onto the locating lugs (Fig. 1). If this is done correctly. The hole for fixing screw and nut will be at the bottom. Fix the safety grille into position by replacing the locking nut tightly by hand (Fig. 1). Do not force the locking nut.
Operation of Your Pedestal Fan Remove the cable tie and unravel the cable before operation. This pedestal fan incorporates an adjustable tilt head for greater air coverage. To adjust the angle of the motor head, loosen tilt-adjustable knob, securely holding the shaft of the pedestal tube, simply lift or lower the motor head housing, the head will click as it is being adjusted, then tighten the tilt-adjustable knob.
Specifications Voltage: 220-240V, 50Hz, Power consumption: 38W Insulation class: Class II Climate class: T NOTE: As a result of continual improvements, the design and specifications of the product within may differ slightly to the unit illustrated on the packaging. Care and Cleaning Always disconnect electrical appliances before cleaning them.
Page 12
M.E.W. (Australia) Pty Ltd. 15 Vaughan Street Essendon Fields, Vic 3041 ACN 152 719 036 After sales support: Aus - 1300 725 885 customercare@gvaproducts.com.au gvaproducts.com.au While every effort has been made in the preparation of this Instruction Manual, the publishers can not be held responsible for the accuracy of the information contained herein or any consequences arising from it.
Need help?
Do you have a question about the G40PFW17 and is the answer not in the manual?
Questions and answers