Table Of Contents; Introduction; Setup; Battery Installation - NexxTech 1519003 Manual

Table of Contents

Introduction ........................................................... 2
Setup ...................................................................... 3
Battery Installation ........................................... 3
Battery Saver .................................................... 3
TV Volume Punch-Through ............................. 3
TV/VCR Punch-Through ................................. 3
Button Functions ................................................... 4
DVD Functions ................................................ 5
SAT Functions .................................................. 5
TV/VCR and TV/DVD Combo units ............... 6
Code Programming ................................................ 6
Direct Code Entry............................................. 6
Code Search ...................................................... 7
Code Identification ........................................... 8
Sleep Functions ..................................................... 8
Product Operation .................................................. 9
Troubleshooting ..................................................... 9

Introduction

Thank you for buying this Nexxtech 4-in-one
Universal Remote. You can use your remote to
replace a broken or lost remote or combine the
functions of up to four remotes.
This remote control operates the common features
of most (but not all) models and brands of IR
(Infrared) controlled video equipment. This remote
may support functions that are not available on
your device. Some functions of your particular
device (such as menu functions) may not be
controlled by this remote. In such cases, use the
original remote control for your device. The
remote can also learn commands from your
original remote. It has partial LED backlighting.
Please use this manual to become familiar with
your remote, then install batteries and set up your
remote for your particular device and brand.
2

Setup

Battery Installation

1. Push down on the tab on the back of the remote
and lift off the cover.
2. Install 2 AAA alkaline batteries (not included)
into the battery compartment as indicated by
the polarity symbols (+ and -) marked inside.
3. Replace the cover.
When the remote's range decreases or it does not
operate properly, replace the batteries. You have 2
minutes to change the batteries without losing
codes you have programmed. However, do not
press any buttons until batteries are installed. If
buttons are pressed without batteries in the remote,
all codes will be lost.

Battery Saver

Your remote automatically times out if the buttons
are pressed more than 30 seconds. This will save
your batteries should your remote get stuck in a
place (for example, between sofa cushions) where
the buttons remain pressed.
TV Volume/Mute Punch-Through
The TV Volume/Mute punch-through feature lets
you control the Volume and Mute function of your
TV in any mode programmed to be a VCR, DVD,
Cable, or SAT device without changing to TV
mode.
VCR/DVD Punch-Through
This remote lets you Punch-through to the last
VCR or DVD device used from any Mode pro-
grammed for TV or Cable. For example, if you
have 3 DVD/VCR devices programmed into this
remote, the last one you accessed on the remote
will be the one that has control of the 6 VCR/DVD
buttons when in any other TV or Cable pro-
grammed Mode.
3