UK Segboards smart segboard User Manual page 11

7) The Charging Step & Remote Use
- Ensure the charger is in a perfect working order and wires
attached properly to the plug
- Open or Locate the charging port at the rear of the Segboard.
- Insert the charger into the unit ensuring the pins are correctly
aligned. DO NOT USE any excessive force to push the charger into
the port as this may cause damage and will invalidate the warranty
- Now plug the adaptor into the power socket
- The red light indicates the Segboard is charging
- When the red lights turns green it means the Segboard is fully
charged and ready to use. At this stage, you must remove the
adaptor and stop the charging process. This will assist in preserving
the battery life.
 You must use the plug provided 


The charging time in approximately 2-3 hours for a full charge
