5. Disengage the bulb socket from
the plug connector by pressing
the retaining lug.
6. Remove and replace the bulb
socket with bulb and attach the
plug connector.
7. Insert the bulb socket into the light
assembly by turning clockwise
and engage.
8. Mount the light assembly by
tightening the three screws.
9. Attach the faceplate and tighten
the screw.
10. Attach and engage the cover.
Tail lights
Tail lights and brake lights are
designed as LEDs. In case of failure,
have LEDs replaced by a workshop.
5-door Hatchback
Light assembly in the body
1. Remove the cover on the
respective side.
Vehicle care
2. Unscrew the two plastic securing
nuts from the inside by hand.
3. Carefully withdraw tail light
assembly from recess and
remove. Take care that the cable
duct remains in position.
251