3. Detach the bulb from the bulb
holder and replace the bulb.
4. Insert the bulb holder.
5. Fit the cap and rotate clockwise.
High beam (2)
1. Rotate the cap anticlockwise and
remove it.
Vehicle care
2. Disengage bulb holder by
pressing the retainer to the front.
Withdraw the bulb holder from the
reflector housing.
3. Detach the bulb from the bulb
holder and replace the bulb.
4. Insert the bulb holder.
5. Fit the cap and rotate clockwise.
Front turn signal light
In case of defective LEDs, have them
replaced by a workshop.
Side light
In case of defective LEDs, have them
replaced by a workshop.
249