Advertisement
1. Lower Dome
2. Black Liner
3. Reset Button
4. AUX Video Output
Interface
5. Serial Port
6. Power Interface
7. Ethernet Interface
8. Adapter Plate
9. Lens
Note:
Please make sure that the wall is
strong enough to withstand three
times the weight of the camera.
1.
Disassembling:
1.
Loosen the three screws on the
edge of the lower dome with a
screwdriver.
2.
Open the lower dome and remove
the black liner.
2.
Ceiling Mounting:
1.
Attach the drill template (supplied)
to the place you want to fix the
camera.
2.
Drill three screw holes in the ceiling
according to the drill template.
3.
If you want to route the cables
inside the ceiling, drill a cable
hole in the ceiling according to the
drill template.
4.
Attach the camera to the ceiling by
aligning the holes of the back box
with the holes on the ceiling.
Advertisement
