JVC KD-AR260 Service Manual page 2

Power Output
Signal to Noise Ratio
Load Impedance
Tone Control Range Bass
Treble
Frequency Response
Line-Out Level/Impedance
Output Impedance
Frequency Range FM
AM
FM Tuner Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity (400 kHz) 65 dB
Frequency Response
Stereo Separation
Capture Ratio
AM Tuner Sensitivity
Selectivity
Type
Signal Detection System
Number of channels
Frequency Response
Dynamic Range
Signal-to-Noise Ratio
Wow and Flutter
Power Requirement Operating Voltage
Grounding System
Allowable Operating Temperature
Dimensions (W × H × D) Installation Size (approx.)
Panel Size (approx.)
Mass (approx.)
Design and specifications are subject to change without notice.
1-2 (No.MA111)
SPECIFICATION
AUDIO AMPLIFIER SECTION
18 W RMS × 4 Channels at 4 Ω and [< or =] 1 % THD + N
80 dBA (reference: 1 W into 4 Ω)
4 Ω (4 Ω to 8 Ω allowance)
±10 dB at 100 Hz
±10 dB at 10 kHz
40 Hz to 20 000 Hz
2.5 V/20 kΩ load (full scale)
1 kΩ
TUNER SECTION
87.5 MHz to 107.9 MHz
530 kHz to 1 710 kHz
11.3 dBf (1.0 µV/75 Ω)
16.3 dBf (1.8 µV/75 Ω)
40 Hz to 15 000 Hz
35 dB
1.5 dB
20 µV
35 dB
CD PLAYER SECTION
Compact disc player
Non-contact optical pickup (semiconductor laser)
2 channels (stereo)
5 Hz to 20 000 Hz
96 dB
98 dB
Less than measurable limit
GENERAL
DC 14.4 V (11 V to 16 V allowance)
Negative ground
0ºC to +40ºC (32ºF to 104ºF)
182 mm × 52 mm × 150 mm (7-3/16" × 2-1/16" × 5-15/16")
188 mm × 58 mm × 11 mm (7-7/16" × 2-5/16" × 7/16")
1.3 kg (2.9 lbs) (excluding accessories)