Selecting Programs To Play - Panasonic LQ-MD800 Operating Instructions Manual

Prelimina

Selecting programs to play

[RAM] [DVD-R]
A list of programs is created as you record them. You can use this list to find the programs you want to watch.
Preparation
･Insert a disc you have recorded on.
1
Press [SEARCH] .
･The program list appears.
･The images for the currently highlighted list are played in the
Use [▲, ▼] to select the program you want to watch and press
2
[ENTER] .
･Play of the images that were playing in the background continues.
■To clear the program list
Press [SEARCH] or [RETURN] .
For your reference
･The direct navigator works while stopped, playing or recording.
･Titles are only displayed if you have given the program a title.
･The unit's clock must be set correctly.
About the program list
a) Program number, Input signal name, recording date, time recording started,
program title (if entered).
･Program 1 is selected in the example.
b) Write-protected
･Displayed when you have protected the program. Program 1 has been
protected in
the example.
c) Copy-protected/Different TV system (PAL or NTSC):
･Displayed when you have recorded a program that has copy protection.
･Displayed when the program failed to record so that the TV system of the
program
is different from the setting in SETUP.
d) NTSC / PAL
･Displayed when you recorded using a different encoding system from that of
the TV
system currently selected on the unit.
e) Unable to play: X
･Displayed if you cannot play the program.
●
f) Currently recording:
･Displayed when the program is being recorded.
g) Scroll bar
･If there are more than 5 programs, you can move down the list by using [
list.
h) Total number of programs
･Shows the total number of programs.
i) Sub menu
･Displayed when you use [
･Erase a program .
･Enter or edit a title .
･Check a program's contents .
･Write-protect a program .
･Erase part of a program .
･Divide a selected program into two.
For your reference
･The list can show up to 99 programs that you have recorded.
･When using DVD-R, "Protection", "Partial Erase" and "Divide" are not displayed in the submenu.
･The contents of the list are recorded on the disc.
[RAM]
･When the disc is protected, you can only access
"Properties". Release the protection to access other items.
Using the SEARCH (DIRECT NAVIGATOR)

] . (You can see this during simultaneous recording and play but you are unable to perform operations.)
▲, ▼
] and this bar shows your approximate position in the
background.