Marking Places To Play Again - Marker - Panasonic LQ-MD800 Operating Instructions Manual

Prelimina

Marking places to play again - MARKER

[RAM] [DVD-R]
You can mark up to 999 points on a disc to return to later. These marks are recorded directly onto DVD-RAM, but are cleared when you
removed or finalized DVD-R.
[DVD-V]
You can mark up to 5 points on a disc to return to later. All the markers are cleared when the disc tray is opened.
■Marking positions directly
During play
Press [MARKER(SHIFT + ENTER)] .
・One marker is added.
■Using FUNCTION menus to mark positions
Displaying the marker icon
1
During play
Press [FUNCTION(SHIFT + STATUS)] .
Use [▲, ▼] to select the Play tab and press [].
2
Use [▲, ▼] to select "Marker" and press [] to highlight the first asterisk (＊).
3
[RAM] [DVD-R]
Marking positions
Use [, ] to select an asterisk (＊).
1
2
Press [ENTER] .
・One marker is added.
When marking positions 11 and above
[RAM] [DVD-R]
Use [, ] to highlight "1-10".
1
Use [▲, ▼] to select "11-20".
2
・You can select the next group of 10 when the current group is full.
3
Use [] .
・The first asterisk is highlighted.
4
Press [ENTER] to mark a position.
To play from a marked position
Use [, ] to select a marker number.
1
2
Press [ENTER] .
・Play starts from the marked position.
■
To clear a marker
, 
Use [ ] to select a marker number and press [SHIFT + RETURN].
・An asterisk replaces the number and the position is cleared.
■
To clear the FUNCTION menus
Press [FUNCTION (SHIFT + STATUS)] .
Note
[RAM]
・This feature doesn't work while using a play list.
・Markers cannot be added to or removed from discs that are protected .
[RAM] [DVD-R]
・The markers are ordered by time. This means that the marker numbers can change when you add and erase markers.
[DVD-V]
・This feature only works if the elapsed playing time of the disc is shown on the unit's display.
・Some subtitles recorded around the marker may fail to appear.
[DVD-V]
Playing discs (continued)