D-Link DAP-1250 Install Manual page 6

Connecting the DAP-1250 Wireless
Access Point to Your Network
A. First, connect the power adapter to the receptor at the back panel of the
DAP-1250 and then plug the other end of the power adapter to a wall outlet
or power strip. The Power LED will turn ON to indicate proper operation.
B. Insert one end of the cable to the Ethernet port on the back panel of the
DAP-1250 and the other end of the cable to your network (switch or router).
Note: You also have the option of connecting the DAP-1250 directly to the
computer that will be used for configuration. The Link LED light will illuminate
to indicate a proper Ethernet connection.
C. The DWL-G650 AirPlus Xtreme G Wireless Cardbus Adapter and the
DWL-G520 AirPlus Xtreme G Wireless PCI Adapter will connect, out of the box,
with the DAP-1250, using their default wireless settings. Computers with
802.11b wireless adapters can also connect to the DAP-1250.