Operation; Start-Up; End Of Operation - Weinmann FW7405M/14 Description And Operating Instructions

4. Operation

4.1 Start-up

4
5
6

4.2 End of operation

5
8
Operation
1. Connect the power supply cable
of the mains charger FW7405M/14.
2. Then insert the power plug
Note: Illumination of the pilot lamp 2 indicates that
the required DC voltage of 13.8 V has been gen-
erated.
3. Select the right connecting cable from (see "3. Unit
Combinations" on page 7).
4. Insert the appropriate end of the connecting cable
in the coupling
5. Connect the other end to the unit to be supplied.
3
Once you no longer need the mains charger
FW7405M/14:
1. Switch off the unit connected.
2. Disconnect the mains charger and the unit con-
nected.
3. Remove the power plug
in a mains socket.
5
of the mains charger.
3
from the mains socket.
5
to the socket
6 4