Table of Contents
Advertisement
Lock or unlock input
Lock the specific external input signals.
1. In the child lock menu, select [Input
Block].
2. Select the source to lock or unlock, then
press OK.
Note:
If you access the input source from the input
list, you are prompted to enter your lock
code.
Parental rating
You can set your TV to display only
programs with ratings limit. This restriction
only applies to digital channels from
broadcasters that rate their programs
according to rating limit.
1. Press MENU.
2. Select [Setup] > [Child lock].
3. Enter the code with the Numeric buttons.
4. Select [Parental Rating].
5. Select a rating limit, then press OK.
For information on child lock codes, see Use
more of your TV > Set locks and timers >
Child lock (Page 15).
Clear child lock settings
You can clear all the child lock settings at
once.
1. Press MENU.
2. Select [Setup] > [Child lock].
3. Enter the code with the Numeric buttons.
4. Select [Clear All], then press OK.
EN
16
Use HDMI Control
What you can do
You can get the most out of your
HDMI-CEC-compliant devices with HDMI
Control enhanced control features. Connect
your HDMI-CEC compliant devices through
HDMI to your TV and control them at the
same time with your TV remote control.
Note: Other brands describe HDMI-CEC
functionality differently. Some examples are
Anynet (Samsung), Aquos Link (Sharp) or
BRAVIA Sync (Sony). Not all brands are fully
compatible with Philips TV.
After you switch on HDMI Control, the
following features are available:
One-touch play
When you play an HDMI-CEC compliant
device, the TV switches on from standby and
switches to the correct source.
One-touch standby
When you press
on the TV remote
control, the TV and all HDMI-CEC
compliant devices switch to standby mode.
EasyLink remote control
You can control multiple HDMI-CEC
compliant devices with your TV remote
control.
System audio control
If you connect an HDMI-CEC compliant
device that includes speakers through the
HDMI ARC connector, you can choose to
hear the TV audio from those speakers
instead of the TV speakers.
Synchronize audio
If you connect your TV to a home theater,
you can synchronize the audio and video to
avoid lag between the picture and sound.
Switch off connecting device
If your connecting device is not the active
source, you can save energy by setting the
TV to switch it to standby.
Advertisement
Table of Contents
