Finishing Up; Managing Recorded Data - Fluke 1750 Getting Started Manual

1750
Getting Started Guide

Finishing Up

After making any corrections to the connections, recheck the PHASOR
diagrams to confirm your connection. Make sure the nominal voltage, nominal
line frequency, and power type (delta, wye, other) are correct before you leave
the Recorder. It is a good practice to insert a Start Mark when you are finished
with all settings so you can download data and ignore useless readings and
events common at the beginning probe connecting activities. You can also use
the "Erase Memory" function and measurement descriptions such as
company, name, and measurement purpose. This can be done at this point or
after downloading the measurement data.

Managing Recorded Data

Recorded data resides in the Recorder on an internal non-physically accessible
flash memory circuit. The transfer of recorded data to the SD card in the
Recorder's SD slot is automatic when you insert the SD card or you request a
download action using the PDA. Downloading to a PC running Fluke Power
Analyze Software (included) using the Ethernet cable is recommended and the
fastest way to retrieve data from the Recorder.
To stop the automatic copy from the SD card memory, go to Menu
>Tools >1750 Internal Memory or Menu >Tools >1750 SD
Memory.
16
Note